 |
|
||
|
#21
30 September 2015, 03:47
|
||||
|
||||
|
Semper Paratus Arms will be in Scottsdale, AZ at Scottsdale Gun Club to teach the SIONICS Weapon Systems 2 day AR15 Armorer Course. AZ law enforcement personnel will receive 16 hours of continuing education credit.
Course registration and payment will be conducted through SGC- http://www.scottsdalegunclub.com/tra...s/sionics-ar15 Dates: November 7/8 2015 Hours: 0930-600 PM Location:14860 N. Northsight Blvd. Scottsdale, Arizona 85260 Cost: $350 per person (SGC Member price is 315.00) STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. Specialized Armament also has various punches available. http://www.specializedarmament.com/ The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed disassembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC 
|
|
#22
2 October 2015, 07:06
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course San Antonio August 2015
Semper Paratus Arms will be teaching two classes in May at Sons of Liberty Gun Works in San Antonio. SOLGW is co-owned by one of our SOCNET members.
Course registration and payment will be conducted through Sons of Liberty Gun Works with special pricing available. In addition students will be able to use tools on site, or may bring their own. Contact Sons of Liberty for all registration and price information. Dates: November 21/22 2015 Time: 0900-1730 Location: https://www.facebook.com/sonsoflibertygw 3822 Pleasanton Road San Antonio, TX (210) 400-5992 Cost: Contact Sons of Liberty Gun Works for pricing. STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. Specialized Armament also has various punches available. http://www.specializedarmament.com/ The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed disassembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#24
2 October 2015, 12:04
|
||||
|
||||
|
Sorry IG. Disregard. Agency will pay for it once I get my POST Firearms Instructor cert under my belt in a few months. Will be looking out for another of your courses ran at SGC once I get that knocked out.
|
|
#25
3 November 2015, 09:00
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course Yuba City, CA February 2016
Semper Paratus Arms will be in Yuba City, CA at Yuba City PD. This course is restricted to LE, military and gov't personnel at the request of the host.
Course registration and payment will be conducted through http://www.semperparatusarms.com/cou...-registration/ Dates: February 10/11 2016 Time: 0830-1730 Location: Yuba City PD 1545 Poole Blvd. Yuba City, CA 95993 Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed disassembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#26
16 November 2015, 21:00
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course Boyd, TX January 2016
Semper Paratus Arms will be in Boyd, TX. This course is being sponsored in cooperation of the Boyd Police Dept and is open enrollment.
Course registration and payment will be conducted through-http://www.semperparatusarms.com/cou...-registration/ Dates: January 30/31 2016 Time: 0900-1730 Location: Boyd Community Center 420 E. Morton Ave. Boyd, TX Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed disassembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#27
2 December 2015, 02:35
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course Edinburg, TX January 2016
Semper Paratus Arms will be in Edinburg, TX. This course is being sponsored by Coyote Arms. There is special pricing for Border Patrol Agents. Please PM me for details.
Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/ Dates: January 24/25 2016 Time: 0900-1730 Location: Coyote Arms Shooting Range http://coyotearmsdefense.com/coyote-arms-shooting-range/ 8600 N. Big Five Edinburg, TX Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed disassembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC Last edited by iraqgunz; 2 December 2015 at 02:51.
|
|
#28
28 December 2015, 01:39
|
||||
|
||||
|
Semper Paratus Arms 1 day AR builder/Intermediate Course Dublin, CA February 2016
Semper Paratus Arms will be in Dublin, CA at AMS Electric in Dublin, CA for a 1 day AR15 intermediate/builder course. This is an open enrollment course.
Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/ Dates: February 7 2016 Time: 0830-1830 Location: AMS Electric 6905 Sierra Court Dublin, CA Cost: 175.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... TD 1 This 1 day (9 hour) intermediate course will focus on the AR15/M4 family of weapons. All students will learn by way of multimedia presentations, lecture and hands on training with their weapon. This course is a scaled down version of the (2) day armorer course designed to give students more than the basics. • History and evolution of the AR15 family of weapons. • Cycle of operation. • Diagnosing and troubleshooting malfunctions. • Replacement of all critical components (extractor, fire control components, springs) • Component selection/comparison and technical specifications. • Maintenance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#29
28 January 2016, 03:23
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course Anchorage, AK March 2016
Semper Paratus Arms will be in Anchorage, Alaska March 2016. This course is being hosted by Alaska Tactical and Security. http://alaskatactical.com/ This is an open enrollment course.
Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/ Dates: March 12/13 2016 Time: 0900-1730 Location: Alaska Tactical and Security http://alaskatactical.com/ 210 Muldoon Road Anchorage, AK Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed dis-assembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#30
28 January 2016, 03:29
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course Waterford, MI April 2016
Semper Paratus Arms will be in Waterford, MI April 2/3 2016. This is an open enrollment course hosted by Geno's Tools and Guns. http://www.genostoolsnguns.com/
Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/ Dates: April 2/3 2016 Time: 0900-1730 Location:Geno's Tools and Guns http://www.genostoolsnguns.com/ 4716 W. Walton Blvd. Waterford, MI Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed dis-assembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#31
28 January 2016, 03:42
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course Fountain, CO March 2016
Semper Paratus Arms will be in Fountain, CO March 2016. This is an open enrollment course hosted by Fountain Police Dept.
Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/ Dates: March 28/29 2016 Time: 0900-1730 Location: Fountain Police Dept. 222 N. Santa Fe Ave. Fountain, CO 80817 Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed dis-assembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#32
28 January 2016, 03:48
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course Jacksonville, NC May 2016
Semper Paratus Arms will be in Jacksonville, NC May 2016 at the SportsmansLodge USA- http://www.sportsmanslodgeusa.com/ on Highway 17.
Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/ Dates: May 16/17 2016 Time: 0900-1730 Location: http://www.sportsmanslodgeusa.com/contact/ 3521 New Bern Highway (Highway 17) Jacksonville, NC 28546 Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed dis-assembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#33
3 February 2016, 16:41
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course McDonough, GA April 2016
Semper Paratus Arms will be in Georgia at the Henry County Police Dept in April 2016. This is an open enrollment course.
Course registration and payment will be conducted through-http://www.semperparatusarms.com/cou...-registration/ Dates: April 16/17 2016 Time: 0900-1730 Location: Henry County Police Dept. 108 S. Zack Hinton Parkway McDonough, GA Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed dis-assembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#34
6 February 2016, 19:00
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course Fredericksburg, VA April 2016
Semper Paratus Arms will be in Fredericksburg, VA in April 2016. This is an open enrollment course.
Course registration and payment will be conducted through-http://www.semperparatusarms.com/cou...-registration/ Dates: April 9/10 2016 Time: 0900-1730 Location: Residence Inn 60 Towne Centre Blvd. Fredericksburg, VA Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed dis-assembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#35
28 February 2016, 02:00
|
||||
|
||||
|
There has been a venue change for this course. The new address is as follows;
Location: 1317 Alum Spring Road (Sign Enterprise/Creations) Fredericksburg, VA Quote:
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#36
28 February 2016, 02:08
|
||||
|
||||
|
Semper Paratus Arms will be in Georgia at the Sandy Springs Police Dept in April 2016. This is an open enrollment course. Seats are limited for this course due to dept requirements.
Course registration and payment will be conducted through-http://www.semperparatusarms.com/cou...-registration/ Dates: April 14/15 2016 Time: 0900-1730 Location: Sandy Springs Police Dept. 7840 Roswell Road, Ste. #301 Sandy Springs, GA Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed dis-assembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#37
26 March 2016, 00:58
|
||||
|
||||
|
Update for the two courses in Georgia next month. The GA POST council has approved these two classes for 16 hours of POST credit.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#38
3 April 2016, 19:19
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course Fountain, CO June 2016
Semper Paratus Arms will be in Fountain, CO, June 2016. This is an open enrollment course hosted by Fountain Police Dept.
Course registration and payment will be conducted through-http://www.semperparatusarms.com/cou...-registration/ Dates: March 28/29 2016 Time: 0900-1730 Location: Fountain Police Dept. 222 N. Santa Fe Ave. Fountain, CO 80817 Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed dis-assembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#39
4 April 2016, 06:12
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course Doylestown, PA May 2016
Semper Paratus Arms will be in Doylestown, PA at the Bucks County Police Training Center. This course is limited to law enforcement, gov't and military personnel.
Course registration and payment will be conducted through-http://www.semperparatusarms.com/cou...-registration/ Dates: May 9/10 2016 Time: 0830-1700 Location: Bucks County Police Training Center http://www.buckscounty.org/governmen...s/PublicSafety 1760 S. Easton Road Doylestown, PA Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed dis-assembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
|
#40
30 April 2016, 04:58
|
||||
|
||||
|
Semper Paratus Arms AR15 Armorer Course Mt. Carroll, IL July 2016
Semper Paratus Arms will be in Illinois at The Site Training Center (formerly Blackwater North). The Site is a privately owned facility which is only a few hours from Chicago, Milwaukee, Madison, Cedar Rapids and several other large population areas. In addition there is lodging on site (for an additional fee).
http://thesitetraining.com/ http://blackbearlodgenorth.com/rates Course registration and payment will be conducted through-http://www.semperparatusarms.com/cou...-registration/ Dates: July 23/24 2016 Time: 0830-1700 Location: The Site Training Center http://thesitetraining.com/ 11311 S Skunk Hollow Rd. Mt. Carroll, IL Cost: 350.00 STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT. Additionally there is a new "minimalist" tool kit for the course. All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required. The complete kit is only necessary for those building a weapon during the course. Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred) Complete set of roll pin holders Complete set of roll pin punches Nylon and Brass Hammer (1 oz.) Small to medium pair of needle nose pliers Large flat tip screwdriver or variable tip screwdriver set Bolt Catch Pin Punch Pivot Pin Installation Tool Note taking material Minimalist Tool List Glock Punch Nylon and Brass gun smithing hammer. (1 oz) 6" flat tip screwdriver or correct allen wrench for grip screw Pivot pin installation tool- Part# 080-216-011WB 1/16 flat punch (Starrett is recommended) Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc...... Overview This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc.... Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages. The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test. TD 1 -Introduction to the AR15 platform, its history, and cycle of operation -Parts breakdown and nomenclature -Tool and equipment selection as well as proper usage -Basic disassembly and reassembly (upper and lower) TD 2 -Overview of TD 1 -Inspection criteria -Troubleshooting and malfunctions -Maintenance -Complete and detailed dis-assembly and assembly of weapon -Written test and certificate issuance Instructor Bio This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers". I have been to some armorer courses. Owner- Semper Paratus Arms, LLC
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
