SOCNET

Go Back   SOCNET: The Special Operations Community Network > Employment and Training > Professional Development and Education

Reply
 
Thread Tools Display Modes
  #81  
Old 17 January 2018, 20:49
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Amarillo, TX- May 2018

Semper Paratus Arms will be in Amarillo, TX for the 2 Day AR15 Armorer Course. This course is open enrollment and all Texas LE personnel will receive TCOLE credit.

ALL STUDENTS MUST USE A CARRYING CASE or LOCKING CONTAINER TO ENTER OR LEAVE THE CAMPUS WITH THEIR RIFLE.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: May 5/6 2018
Time: 0900-1730 (Approx.)
Location: Amarillo College (West Campus) Building C
https://www.actx.edu/cr/amarillo-college-west-campus
Amarillo, TX



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
Nylon and Brass Hammer (1 oz.)
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material

Minimalist Tool List

Glock Punch
Nylon and Brass gun smithing hammer. (1 oz)
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
USB/Flash Drive
Notebook/Paper

Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #82  
Old 24 January 2018, 19:40
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Pullman, WA April 2018

Semper Paratus Arms will be in Pullman, WA with the WSU Police Dept. for the 2 day AR15 Armorer Course. This course is open enrollment. Students driving a privately owned vehicle will need to purchase a daily Yellow 4 Permit for parking- https://parking.wsu.edu/

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: April 2/3 2018
Time: 0900-1730 (Approx.)
Location: WSU Public Safety Bldg.
2201 E. Grimes Way
Pullman, WA 99164


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. (Prior Approval Required)

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #83  
Old 1 February 2018, 05:20
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Johnstown, CO April 2018

Semper Paratus Arms will be in Colorado at the Liberty Firearms Institute in Johnstown, Colorado (Ft. Collins/Loveland area). This is an open enrollment course and is being hosted by the Makhaira Group.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: April 28/29 2018
Time: 0900-1730
Location: Liberty Firearms Institute
https://www.libertyrange.com/
4990 Ronald Reagan Blvd.
Johnstown, CO



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #84  
Old 3 February 2018, 05:43
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Doylestown, PA June 2018

Semper Paratus Arms will be in Pennsylvania at the Bucks County Public Safety/Police Training Center. This course is open enrollment, but there will be limited seats for civilian personnel.

Additionally PA LE personnel may receive credit for this class. **Updates to this will follow**.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: June 18/19 2018
Time: 0900-1730 (Approx.)
Location: Bucks County Public Safety / Police Training Center
http://www.buckscounty.org/governmen...s/PublicSafety
1760 S. Easton Road
Doylestown, PA 18901



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is recommended)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #85  
Old 6 February 2018, 06:04
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Riverdale, IL May 2018

Semper Paratus Arms will be in Illinois with the Riverdale Police Dept. This course is limited to LEO/MIL/GOV only, however this may change.


Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: May 10/11 2018
Time: 0900-1730 (Approx.)
Location: Riverdale Police Dept.
725 W. 138th Street
Riverdale, IL 60827



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is recommended)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #86  
Old 8 February 2018, 04:20
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
THIS COURSE WILL BE OPEN ENROLLMENT.

Quote:
Originally Posted by iraqgunz View Post
Semper Paratus Arms will be in Illinois with the Riverdale Police Dept. This course is limited to LEO/MIL/GOV only, however this may change.


Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: May 10/11 2018
Time: 0900-1730 (Approx.)
Location: Riverdale Police Dept.
725 W. 138th Street
Riverdale, IL 60827



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is recommended)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #87  
Old 9 February 2018, 07:50
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Somerset, NJ June 2018

Semper Paratus Arms will be in New Jersey with the Franklin Township Police Dept. This course is limited to LEO/MIL/GOV personnel only. All students must have a soft/hard case to enter and exit the building.


Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: June 14/15 2018
Time: 0900-1730 (Approx.)
Location: Franklin Township Police Dept.
http://www.franklintwpnj.org/governm...rtments/police
495 Demott Lane
Somerset, NJ 08873



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is recommended)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #88  
Old 9 February 2018, 21:21
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
ANOTHER UPDATE. Due to Cook County's silly "assault weapons" restrictions this course will be LEO/MIL/GOV only.

Quote:
Originally Posted by iraqgunz View Post
THIS COURSE WILL BE OPEN ENROLLMENT.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #89  
Old 10 March 2018, 06:18
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course McDonough, GA- June 2018

Semper Paratus Arms will be in Georgia at the Henry County Police Dept (Training Room) in McDonough, GA. This is an open enrollment course. GA POST credit has been approved for GA law enforcement personnel.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: June 9/10 2018
Time: 0900-1730
Location: Henry County Police Dept.
108 S. Zack Hinton Parkway
McDonough, GA 30253



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC

Last edited by iraqgunz; 10 March 2018 at 06:30.
Reply With Quote
  #90  
Old 10 March 2018, 06:23
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Sandy Springs, GA- June 2018

Semper Paratus Arms will be doing an additional add on course in Georgia and it is being hosted by Sandy Springs PD, Georgia. This course is limited to LEO/MIL/GOV personnel and some firearms industry personnel (with approval) and GA POST credit has been approved for GA law enforcement personnel.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: June 5/6 2018
Time: 0900-1730
Location: Sandy Springs Police Dept.
7840 Roswell Road, Ste. #301
Sandy Springs, GA 30328



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC

Last edited by iraqgunz; 10 March 2018 at 06:30.
Reply With Quote
  #91  
Old 10 March 2018, 06:26
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course West Richland, WA- July 2018

Semper Paratus Arms will be in West Richland, WA for the 2 day AR15 Armorer Course. This course is being hosted by the West Richland Police Dept and is limited to LE/MIL/GOV personnel only.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: July 18/19 2018
Time: 0900-1730
Location: West Richland Municipal Bldg.
3000 Belmont Blvd.
West Richland, WA 99353


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #92  
Old 10 March 2018, 06:28
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Conroe, TX- August 2018

Semper Paratus Arms will be in Conroe, Texas to teach the 2 day AR15 Armorer Course. This course is being hosted by Big Tex Outdoors.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: August 4/5 2018
Time: 0900-1730
Location: Big Tex Outdoors
https://bigtexoutdoors.com/
13921 Highway 105W #3110
Conroe, TX 77304



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #93  
Old 24 March 2018, 06:23
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course S. San Francisco, CA- August 2018

Semper Paratus Arms will be in South San Francisco, CA for the 2 day AR15 Armorer Course. This course is being hosted by the South San Francisco Police Dept and is limited to LE/MIL/GOV personnel only.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: August 20/21 2018
Time: 0900-1730
Location: South San Francisco Police Dept.
33 Arroyo Drive, Suite C
South San Francisco, CA 94080


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #94  
Old 24 March 2018, 06:25
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Hopkins, MN- May 2018

Semper Paratus Arms will be in Hopkins, MN for the 2 day AR15 Armorer Course. This course is being hosted by the Hopkins Police Dept. (Minnesota) and is limited to LE/MIL/GOV and Firearms Industry Personnel. MN POST credit has been applied for and it is expected to be approved.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: May 15/16 2018
Time: 0900-1730
Location: Hopkins Fire Dept. (Training Room)
101 17th Avenue South
Hopkins, MN 55343


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #95  
Old 24 March 2018, 06:27
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Abilene, TX- September 2018

Semper Paratus Arms will be in Abilene, Texas for the 2 day AR15 Armorer Course. This course is being hosted by the Abilene Police Dept. TCOLE credit will be given to Texas LE personnel.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: September 6/7 2018
Time: 0900-1730
Location: Abilene Police Academy Training
4557 East Lake Road
Abilene, TX 79601


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #96  
Old 24 March 2018, 06:28
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Palm Springs, CA- September 2018

Semper Paratus Arms will be in Palm Springs, CA for the 2 day AR15 Armorer Course. This course is being hosted by the Palm Springs Police Dept and is limited to LE/MIL/GOV personnel only.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: September 25/26 2018
Time: 0900-1730
Location: Palm Springs Police Dept.
200 South Civic Drive, Room 101B
Palm Springs, CA 92262


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #97  
Old 24 March 2018, 06:30
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Corona, CA- October 2018

Semper Paratus Arms will be in Corona, CA for the 2 day AR15 Armorer Course. This course is being hosted by the Corona Police Dept and is limited to LE/MIL/GOV personnel only.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: October 29/30 2018
Time: 0900-1730
Location: Corona Police Dept.
730 Public Safety Way
Corona, CA 92880


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #98  
Old 2 April 2018, 03:37
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Tucson, AZ- May 2018

Semper Paratus Arms will be in Tucson with the Tucson Airport Authority for the 2 day AR15 Armorer Course. This course is limited to LE/MIL/GOV personnel only.

Course registration and payment will be conducted through Semper Paratus Arms- http://www.semperparatusarms.com/cou...-registration/

Dates: May 29/30 2018
Time: 0900-1730
Location: TAA Warehouse (Training Room)
2747 E. Airport Drive
Tucson, AZ 85756


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #99  
Old 2 April 2018, 03:38
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Semper Paratus Arms 2 Day AR15 Armorer Course Scottsdale, AZ- September 2018

Scottsdale Gun Club will be hosting the Semper Paratus Arms/SIONICS AR15 Armorer Course this fall. This is the only open enrollment course planned for Arizona this year.

Course registration and payment will be conducted through SGC- https://scottsdalegunclub.com/classe...er-course.html

Dates: September 29/30 2018
Time: 0930-1730
Location: Scottsdale Gun Club
14860 N. Northsight Blvd.
Scottsdale, AZ 85260


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #100  
Old 21 May 2018, 21:17
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,988
Palm Springs has been moved to January 2019 due to facilities maintenance issues.

Quote:
Originally Posted by iraqgunz View Post
Semper Paratus Arms will be in Palm Springs, CA for the 2 day AR15 Armorer Course. This course is being hosted by the Palm Springs Police Dept and is limited to LE/MIL/GOV personnel only.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: September 25/26 2018
Time: 0900-1730
Location: Palm Springs Police Dept.
200 South Civic Drive, Room 101B
Palm Springs, CA 92262


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
Reply

Thread Tools
Display Modes

Our new posting rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -4. The time now is 04:40.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Socnet.com All Rights Reserved
© SOCNET 1996-2018