SOCNET

Go Back   SOCNET: The Special Operations Community Network > Employment and Training > Professional Development and Education

Reply
 
Thread Tools Display Modes
  #101  
Old 21 May 2018, 21:33
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 2 Day AR15 Armorer Course Haltom City, TX- September 2018

Semper Paratus Arms will be in metro DFW (Haltom City) for the 2 day AR15 Armorer Course. This course is being hosted by the Haltom City Police Dept. TCOLE credit will be given to Texas LE personnel. This course is open enrollment.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: September 10/11 2018
Time: 0900-1730
Location: Haltom City Fire Station No. 1
5525 Broadway Ave.
Haltom City, TX 76117


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #102  
Old 26 May 2018, 04:59
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 2 Day AR15 Armorer Course Yuba City, CA- August 2018

Semper Paratus Arms will be in Yuba City, CA for the 2 day AR15 Armorer Course. This course is being hosted by the Yuba City Police Dept and is open enrollment.

There will be a 1 day add-on advanced course on 17 August 2018. This will consist of some live fire at the range and additional classroom time. Additional information on this will be coming.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: August 15/16 2018
Time: 0900-1730
Location: Sutter County Sheriff's Dept Training Center
44 2nd Street.
Yuba City, CA 85993


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #103  
Old 26 June 2018, 01:44
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 2 Day AR15 Armorer Course Ashland, VA- September 2018

Semper Paratus Arms will be in Ashland, VA for the 2 day AR15 Armorer Course. This course is being hosted by the Winding Brook Indoor Shooting Range.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: September 15/16 2018
Time: 0900-1730
Location: Winding Brook Indoor Shooting Range
https://wbisr.com/
11547 Lakeridge Parkway
Ashland, VA 23005


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #104  
Old 29 June 2018, 04:09
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 2 Day AR15 Armorer Course St. Helens, OR- October 2018

Semper Paratus Arms will be in St. Helens, Oregon for the 2 day AR15 Armorer Course. This course is being hosted by Pacific Tactical LLC.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: October 25/26 2018
Time: 0900-1730
Location: Pacific Tactical Training Center
565 S. Columbia River Highway
St. Helens, OR 97051


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course. These are the basic items needed for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #105  
Old 3 July 2018, 07:55
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 2 Day AR15 Armorer Course Reno, NV- October 2018

Semper Paratus Arms will be in The Biggest Little City in the World for the 2 day AR15 Armorer Course. This course is being hosted by the Washoe County Sheriff's Office. This course is limited to LE/MIL/Gov personnel only.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: October 22/23 2018
Time: 0900-1730
Location: Regional Public Safety Training Center
https://rpstc-reno.com/
5190 Spectrum Blvd.
Reno, NV 89512


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course. These are the basic items needed for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #106  
Old 31 August 2018, 05:07
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 2 Day AR15 Armorer Course Warr Acres, OK- November 2018

Semper Paratus Arms will be in Warr Acres, OK for the 2 day AR15 Armorer Course. This course is being hosted by the Warr Acres PD and Paratus 46. This course is open enrollment.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: November 17/18 2018
Time: 0900-1730
Location: Warr Acres PD Range/Classroom
4375 NW 192nd St.
Oklahoma City, OK 73012


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course. These are the basic items needed for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #107  
Old 31 August 2018, 05:09
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 2 Day AR15 Armorer Course Austin, TX- December 2018

Semper Paratus Arms will be in Austin, Texas for the 2 day AR15 Armorer Course. This course is being hosted by Austin PD. This course is limited to LE/MIL/GOV personnel. Seating is limited as the host agency has booked most of the slots.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: December 11/12 2018
Time: 0800-1630
Location: Austin Public Safety Training Facility
4800 Shaw Lane
Austin, TX 78744


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT (On Approval).

Additionally there is a new "minimalist" tool kit for the course. These are the basic items needed for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #108  
Old 22 September 2018, 07:41
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 2 Day AR15 Armorer Course Morgantown, IN- October 2018

Semper Paratus Arms will be in Morgantown, Indiana for the 2 day AR15 Armorer Course. This course is being co-sponsored by Centurion Arms. https://www.centurionarms.com/. Students will be able to purchase Centurion Arms products during the course and arrangements are being made to build uppers in the class as well. Centurion Arms is a veteran owned business (retired U.S. Navy SEAL Chief).

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: October 13/14 2018
Time: 0900-1730
Location: Morgantown Fire Dept.
269 N. Highland St.
Morgantown, IN 46160


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #109  
Old 5 December 2018, 05:45
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 2 Day AR15 Armorer Course Tracy, CA- March 2019

Semper Paratus Arms will be in Tracy, CA for the 2 day AR15 Armorer Course. This course is being hosted by Tracy Police Dept. and is limited to LE/MIL/GOV personnel only. In addition there is a 1 Day Advanced Course Add-On.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: March 5/6 2019
Time: 0900-1730
Location: Tracy Police Dept.
1000 Civic Center Drive
Tracy, CA 95376


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

The "minimalist" tool kit is the basic items needed for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete tool list is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct hex wrench for pistol grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended) Part# 827-525-780WB
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, PowerPoint and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #110  
Old 5 December 2018, 05:46
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 1 Day AR15 Advanced Armorer Course Add-On Tracy, CA- March 2019

Semper Paratus Arms will be conducting a 1 Day AR15 Advanced Armorer Course as an add on to the 2 Day AR15 Armorer Course being hosted by Tracy Police Dept.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: March 7 2019
Time: 0900-1630
Location: Tracy Police Dept. (Range)
Meet Location: 2610 South Tracy Blvd (Starbucks Parking Area)
Tracy, CA 95376


Cost: 150.00 (Use the AR Builder's Course option for payment).

Students will participate in some live fire and observations which will require them to identify various malfunctions and corrective action. Afterwards, there will be additional classroom time where students will be required to disassemble and inspect weapons and make observations and notes about discrepancies and issues. Ammunition and weapons will be provided during this course. Students will still need the Minimalist Tools listed below.

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended) Part# 827-525-780WB
Note taking material
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #111  
Old 7 December 2018, 05:30
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 2 Day AR15 Armorer Course Naples, FL- February 2019

Semper Paratus Arms will be in Florida for the 2 day AR15 Armorer Course. This course is being hosted by The Alamo Range. This course is limited to 14 persons.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: February 16/17 2019
Time: 0900-1730
Location: The Alamo Range
https://alamorange.com/
2390 Vanderbilt Beach Road
Naples, FL 34109


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

The "minimalist" tool kit is the basic items needed for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete tool list is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct hex wrench for pistol grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended) Part# 827-525-780WB
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, PowerPoint and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #112  
Old 7 December 2018, 05:32
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 1 Day AR15 Builder's Course Naples, FL- February 2019

Semper Paratus Arms will be in Florida for the 1 day SIONICS AR15 Builder's Course. This course is being hosted by The Alamo Range. This course is limited to 12 persons.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: February 15 2019
Time: 1000-1730
Location: The Alamo Range
https://alamorange.com/
2390 Vanderbilt Beach Road
Naples, FL 34109


Cost: 1250.00

STUDENTS MUST BRING A SIONICS AR KIT PURCHASED FROM THE ALAMO. ALL TOOLS ARE PROVIDED.


The SPA/SIONICS AR15 Builder's Course allows students to build a SIONICS 16" Midlength Carbine. Students will be guided through the process by Will Larson, Master Armorer at SIONICS. There will be a brief overview of the basic function and all students will have their completed carbines inspected upon completion. They will then have an opportunity to test fire their weapons at the range.

Students shall provide ammunition and magazine for the test-fire.

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC

Last edited by iraqgunz; 7 December 2018 at 05:52.
Reply With Quote
  #113  
Old 7 December 2018, 05:34
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 2 Day AR15 Armorer's Course Ridgefield, WA- February 2019

Semper Paratus Arms will be in Washington State for the 2 day AR15 Armorer Course. This course is being hosted by the Clark County Sheriff's Office. This course is limited to LE/MIL/GOV personnel only.

Course registration and payment will be conducted through- http://www.semperparatusarms.com/cou...-registration/

Dates: February 28/March 1 2019
Time: 0830-1700
Location: Public Safety Complex
505 NW 179th Street
Ridgefield, WA 98642


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

The "minimalist" tool kit is the basic items needed for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete tool list is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct hex wrench for pistol grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended) Part# 827-525-780WB
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, PowerPoint and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #114  
Old 7 December 2018, 05:51
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 1 Day AR15 Builder's Course Johnstown, CO- May 2019

Semper Paratus Arms will be in Colorado for the 1 day SIONICS AR15 Builder's Course. This course is being hosted by Liberty Firearms Institute.

Course registration and payment here- https://tms.ezfacility.com/OnlineReg...roupID=2274225

Dates: May 17 2019
Time: 0930-1830 (Approx.)
Location: Liberty Firearms Institute
https://www.libertyrange.com/
4990 Ronald Reagan Blvd.
Johnstown, CO 80534


Cost: 1250.00

STUDENTS MUST BRING A SIONICS AR KIT PURCHASED FROM LFI. ALL TOOLS ARE PROVIDED.


The SPA/SIONICS AR15 Builder's Course allows students to build a SIONICS 16" Midlength Carbine. Students will be guided through the process by Will Larson, Master Armorer at SIONICS. There will be a brief overview of the basic function and all students will have their completed carbines inspected upon completion. They will then have an opportunity to test fire their weapons at the LFI Range.

Students shall provide ammunition and magazine for the test-fire.

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #115  
Old 7 December 2018, 05:54
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 6,016
Semper Paratus Arms 2 Day AR15 Armorer Course Johnstown, CO- May 2019

Semper Paratus Arms will be in Colorado for the 2 day AR15 Armorer Course. This course is being hosted by Liberty Firearms Institute.

Course registration and payment here- https://tms.ezfacility.com/OnlineReg...roupID=2274222

Dates: May 18/19 2019
Time: 0900-1730
Location: Liberty Firearms Institute
https://www.libertyrange.com/
4990 Ronald Reagan Blvd.
Johnstown, CO 80534


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

The "minimalist" tool kit is the basic items needed for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete tool list is only necessary for those building a weapon during the course. Prior approval is required.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer. Part# 818-600-100WB
6" flat tip screwdriver or correct hex wrench for pistol grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended) Part# 827-525-780WB
Note taking material
USB Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, PowerPoint and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
Reply

Thread Tools
Display Modes

Our new posting rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -4. The time now is 16:41.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Socnet.com All Rights Reserved
© SOCNET 1996-2018