Go Back   SOCNET: The Special Operations Community Network > Employment and Training > Professional Development and Education

Reply
 
Thread Tools Display Modes
  #61  
Old 2 April 2017, 04:14
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,850
Semper Paratus Arms 2 Day AR15 Armorer Course Muncie, IN August 2017

Don't be a Hoosier. Semper Paratus Arms will be in Muncie, IN for the 2 Day AR15 Armorer Course. This course is open enrollment.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: August 12/13 2017
Time: 0900-1730 (Approx.)
Location: Multi Threat Assessment Center
http://mtactraining.com/
3800 E. McGalliard Road
Muncie, IN 47030



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #62  
Old 2 April 2017, 04:16
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,850
Semper Paratus Arms 2 Day AR15 Armorer Course Gorham, ME September 2017

Semper Paratus Arms will be in Gorham, ME to teach the 2 day AR15 Armorer Course. The course is being hosted by First Due Firearms in Sabattus, ME.

This is an open enrollment course and you do not need to be a member to attend.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: September 9/10 2017
Time: 0900-1730 (Approx.)
Location: Windham Gorham Rod & Gun Club
http://www.windhamgorhamrodandgunclub.club/
8 Tow Path Road
Gorham, ME 04038



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course. Those items are the only ones required for the armorer course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course. (Prior Approval Required)

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
USB Thumb Drive

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Note taking material
USB Thumb Drive


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #63  
Old 1 June 2017, 04:32
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,850
Semper Paratus Arms 3 Day AR15 Armorer Course Anchorage, AK November 2017

Semper Paratus Arms will be in Alaska doing a 3 Day AR15 Armorer Course with Anchorage PD. This course is currently only open to LE/MIL/GOV personnel only. **Subject to change**.

This course will differ from previous courses in that day 3 will be lots of hands-on and diagnosing malfunctions, and conducting inspections.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: November 14-16 2017
Time: 0900-1700 (Approx.)
Location: Anchorage Police Dept.
3760 W. Dimond Blvd.
Anchorage, AK



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed disassembly and assembly of weapon

TD3

-Assembly/Disassembly of weapons
-Diagnosing Malfunctions
-Conducting Inspections
-Repairs to individual weapons
-Written test and certificate issuance


Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #64  
Old 1 June 2017, 04:40
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,850
Semper Paratus Arms 2 Day AR15 Armorer Course Doylestown, PA October 2017

Semper Paratus Arms will be in Pennsylvania at the Bucks County Public Safety/Police Training Center. This course is currently only open to LE, MIL/GOV personnel. **This may change before the course starts so check back for updates**.

Additionally PA LE personnel may receive credit for this class. **Updates to this will follow**.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: October 16/17 2017
Time: 0900-1730 (Approx.)
Location: Bucks County Public Safety / Police Training Center
http://www.buckscounty.org/governmen...s/PublicSafety
1760 S. Easton Road
Doylestown, PA



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #65  
Old 28 July 2017, 07:21
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,850
Semper Paratus Arms 2 Day AR15 Armorer Course Amarillo, TX September 2017

Semper Paratus Arms will be in Amarillo, TX for the 2 Day AR15 Armorer Course. This course is open enrollment and all Texas LE personnel will receive TCOLE credit.

ALL STUDENTS MUST USE A CARRYING CASE or LOCKING CONTAINER TO ENTER OR LEAVE THE CAMPUS WITH THEIR RIFLE.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: September 23/24 2017
Time: 0900-1730 (Approx.)
Location: Amarillo College (West Campus)
Building C, RM 113
https://www.actx.edu/cr/amarillo-college-west-campus
Amarillo, TX



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
Nylon and Brass Hammer (1 oz.)
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material

Minimalist Tool List

Glock Punch
Nylon and Brass gun smithing hammer. (1 oz)
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #66  
Old 28 July 2017, 07:24
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,850
Semper Paratus Arms 2 Day AR15 Armorer Course LaGrange, GA October 2017

Semper Paratus Arms will be conducting the 2 day AR15 Armorer Course at FMJ Armory in LaGrange, GA. This course will be limited to (14) students. All students will be receiving some free swag courtesy of Semper Paratus Arms, Warrior Industries and FMJ Armory.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: October 7/8 2017
Time: 0900-1730 (Approx.)
Location: FMJ Armory
http://fmjarmory.com/contact/4067970
2221 W. Point Road
LaGrange, GA 30240


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #67  
Old 28 July 2017, 07:26
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,850
Semper Paratus Arms 2 Day AR15 Armorer Course St. Petersburg, FL Sep./Oct 2017

Semper Paratus Arms will be conducting the 2 day AR15 Armorer Course at Defense Academics. This is an open enrollment course.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: September 30/ October 1 2017
Time: 0900-1730 (Approx.)
Location: Defense Academics
2660 5th. Ave North
St. Petersburg, FL 33713


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #68  
Old 7 August 2017, 07:18
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,850
Semper Paratus Arms 2 Day AR15 Armorer Course Syracuse, NY October 2017

Semper Paratus Arms will be conducting the 2 Day AR15 Armorer Course in Syracuse, NY with Syracuse Police Dept. It is limited to LE/MIL/GOV personnel only.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: October 19/20 2017
Time: 0900-1730 (Approx.)
Location: Syracuse PD
2109 Erie Blvd East
Syracuse, NY 13206


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #69  
Old 10 August 2017, 20:42
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,850
The Alaska course at APD is approved for AK POST credit.

Quote:
Originally Posted by iraqgunz View Post
Semper Paratus Arms will be in Alaska doing a 3 Day AR15 Armorer Course with Anchorage PD. This course is currently only open to LE/MIL/GOV personnel only. **Subject to change**.

This course will differ from previous courses in that day 3 will be lots of hands-on and diagnosing malfunctions, and conducting inspections.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: November 14-16 2017
Time: 0900-1700 (Approx.)
Location: Anchorage Police Dept.
3760 W. Dimond Blvd.
Anchorage, AK



Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed disassembly and assembly of weapon

TD3

-Assembly/Disassembly of weapons
-Diagnosing Malfunctions
-Conducting Inspections
-Repairs to individual weapons
-Written test and certificate issuance


Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #70  
Old 11 August 2017, 03:00
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,850
Semper Paratus Arms 2 Day AR15 Armorer Course San Antonio, TX January 2018

Semper Paratus Arms will be conducting the 2 Day AR15 Armorer Course in partnership with Sons of Liberty Gun Works of San Antonio, TX. This course will be held at the SAPD Training Academy Firearms Range and is limited to LE/MIL/GOV personnel only. The course is already 40% filled so do not hesitate to get signed up.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: January 4/5 2018
Time: 0900-1730 (Approx.)
Location: SAPD Training Academy Firearms Range
12200 S.E Loop 410.
San Antonio, TX 78221


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #71  
Old 22 August 2017, 06:00
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,850
Semper Paratus Arms 2 Day AR15 Armorer Course Loveland, CO October 2017

Semper Paratus Arms will be in Loveland, Colorado at Jensen Arms for the 2 day AR15 Armorer Course. This course will be held at the store and is open enrollment.

Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

Dates: October 28/29 2017
Time: 0900-1730 (Approx.)
Location: Jensen Arms
http://shop.jensenarms.com/contact.php
285 E. 29th St. Suite E
Loveland, CO 80538


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 29 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
  #72  
Old 4 September 2017, 02:08
iraqgunz's Avatar
iraqgunz iraqgunz is offline
Overseas Gunplumber
 
Join Date: Feb 2006
Location: Warm and sunny Arizona
Posts: 5,850
Semper Paratus Arms 2 Day AR15 Armorer Course Amarillo, TX November 2017

Semper Paratus Arms will be in San Antonio, TX with Sons of Liberty Gun Works for the 2 day AR15 Armorer Course. This course is open enrollment.

Course registration and payment will be conducted through Sons of Liberty Gun Works- https://sonsoflibertygunworks.com/

Dates: November 4/5 2017
Time: 0900-1730 (Approx.)
Location: Sons of Liberty Gun Works
3822 Pleasanton Road
San Antonio, TX 78221


Cost: 350.00

STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

Additionally there is a new "minimalist" tool kit for the course.

All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


The complete kit is only necessary for those building a weapon during the course.

Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material

Minimalist Tool List

Glock Punch
1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)


Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

Overview

This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

TD 1

-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)

TD 2

-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed disassembly and assembly of weapon

Instructor Bio

This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
__________________
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers".

I have been to some armorer courses.

Owner- Semper Paratus Arms, LLC
Reply With Quote
Reply

Thread Tools
Display Modes

Our new posting rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -4. The time now is 23:22.
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Socnet.com All Rights Reserved
SOCNET